Loading Library Hours...

Topographic Map Basics

The Map Library offers an extensive collection of topographic mapscovering much of the world. The collection includes publications from the USGS as well as those published by foreign agencies.Topographic maps are used widely for applications such as hiking and camping, engineering, landconservation, etc. The feature that distinguishes a topographic map from any other type of map iscontour lines that show lines of equal elevation. This method proves to be a highly effectiveway of portraying three-dimensional land forms on a two-dimensional piece of paper.
Understanding Map Scales
Mapping Definitions
How Map Areas Are Defined
Determining What Map Sheet You Need
For more excellent introductory information on topographic maps visit the sites for the USGS Topographic Maps or Natural Resources Canada .

Understanding Map Scales

Understanding the concept of scale is useful when dealing with maps. Scale is the ratio ofthe distance on the map to the actual distance on the Earth’s surface. A map of scale 1:24,000means that one inch on the map is equivalent to 24,000 inches on the ground.

Large versus Small Scale
The concept of scale can be confusing because 1:24,000 maps are considered to be large scale,while small scale maps often have a scale of 1:1,000,000. In order to make sense of large versussmall scale maps, it may be helpful to think of the ratio (e.g. 1:24,000 or 1:1,000,000) as afraction. The larger the value of the fraction the larger the scale (e.g. 1/24,000 is larger than1/1,000,000). With a large scale map it is possible to see more detail than with a small scalemap.

Take a look at the difference in detail you can see of the Fermi National Accelerator Laboratory(Batavia, Illinois) in the following maps with various scales. The ring is approximately 1.25 milesin diameter.

1:250,000                                                  1:100,000                                            1:25,000

1:250,000 scale map of Fermi National Accelerator1:100,000 scale map of Fermi National Accelerator1:24,000 scale map of Fermi National Accelerator

(Please note that this image was constructed
by combining images from two topographic
This table shows some common map scales available in the Map Library’s collection with thedistances they represent:
Scale 1 inch represents approximately 1 centimeter represents Approximate Square Miles to a Typical Map Sheet
1:20,000 1,667 feet 200 meters 71
1:24,000 2,000 feet (exact) 240 meters 49 to 70
1:25,000 2,083 feet 250 meters 49 to 70 or 98 to 140
1:50,000 4,166 feet 500 meters 197 to 282
1:62,500 1 mile 625 meters 197 to 282
1:63,360 1 mile (exact) 633.6 meters 207 to 281
1:100,000 1.6 miles 1 kilometer 1,568 to 2,240
1:125,000 2 miles 1.25 kilometers 786 to 1,124
1:250,000 4 miles 2.5 kilometers 4,580 to 8,669
1:500,000 8 miles 5 kilometers varies
1:1,000,000 16 miles 10 kilometers varies
1:2,000,000 32 miles 20 kilometers varies

Definitions of key mapping terms

Contour Lines Isolines that show equal elevation on a map at definedintervals.

Declination A measurement of the degree to which a grid or magnetic north variesfrom true north. Declination is usually measured in mils, where one mil is equal to 1/6,400 of 360degrees.

Graticules* A network of lines on a map that represent the meridians of longitudeand parallels of latitude.

Grid North** North according to the grid imposed on the map. Because grids ignorethe curvature of the Earth, this is not the same as true north.

Grid* A network of uniformly spaced lines on the face of a map, intersecting atright angles and usually running north-south and east-west. Grids are often numbered and can beused to define position by rectangular coordinates.

Index Map A map that accompanies a map set that shows theoverall arrangement of maps in the set and shows their numbering scheme and areas of coverage. Itis useful for finding the particular map needed without having to browse through the entire mapset. Think of an index map like a visual book index. The index map shows you the contents of a mapset so you can choose the specific page (or sheet) you need.

Magnetic North** North according to the Earth’s magnetic poles rather than itsgeographic poles. Declination from true north is given in mils where one mil equals 1/6,400 of 360degrees.
Meridian A starting point/line, usually a line of longitude, for a numberingsystem to section the earth into a grid.

Projection A way of depicting the three-dimensional surface of the Earth onto atwo-dimensional sheet of map paper. There are many types of projections all of which aim to havethe least amount of distortion on as many properties of the map as possible, such as distance,angular measurement, area, or shape.

True North** Geographic north. What most people think of when they hear the wordnorth.

* Definitions taken from World Mapping Today by R.B. Parry and C.R. Perkins (1987, London,Butterworths) (Call number Q.025.286 W893. Stored at Oak Street.)
** Definitions taken from page 266 of Map Librarianship by Mary Larsgaard (1998, Englewood, Colorado,Libraries Unlimited, Inc.) (Available in the Map Library and the Main Stacks.)

How Map Areas Are Defined

Topographic maps are published in sets that cover a large named geographic area. Each individualmap within a set contains a unique identifier that may be comprised of numbers, letters, numbersand letters, or a name that has significance in the area covered. The identifiers are typicallydetermined according to one or more grid systems used by the map publisher. For instance, for theUSGS 7.5 minute topographic quad series, the grid is determined by sectioning the United Statesinto (approximate) rectangles that are 7.5 minutes of latitude by 7.5 minutes of longitude. Each ofthese “quadrangles” is given an individual name that typically represents the most prominentfeature of the area covered.

There are many such grid systems in existence in the mapping world. The U.S. Army Map Servicepublished a set of 1:250,000 maps that use a map designation system where blocks north of theequator start with N and blocks south start with S. A typical block is numbered as follows: NB39-12. The second letter is from A to Z, the letter determined by increasing distance from theequator. The next component of the designation gives information about how far the block is from ameridian. The area NB 39 is then further subdivided into 12 or 16 smaller blocks (depending onlatitude) to which the final component of the map designation system refers. This system is stillbeing used today by map publishers around the world, like the Pan American Institute of Geographyand History (PAIGH) that published a set of topographic maps of Latin America.

Grid systems can be universal, like the Universal Transverse Mercator (UTM) Grid, they can benational, such as the Great Britain National Grid System, or they could be determined on amap-by-map basis.

Back to top

Determining What Map Sheet You Need

Once you narrow your geographic search to a specific map set that has the type of informationyou need, it is necessary to find a particular map within the series. This can be accomplishedthrough the use of an index map for the map set. The index map shows all of the individual mapswithin a set, overlaid onto the larger geographical area that the set covers. It is usuallynecessary to consult the index map in order to find the sheet number of the individual map yourequire. In the example below, you would request sheet #6 to see the map covering Cherbourg,France.


Example index map for a 1:100,000 series of maps of France.
The Map Library holds the index maps for most of its series in afile cabinet near the circulation desk in call number order. Please ask at the desk for assistancein locating and retrieving an individual map from a map series.
Map sets that are physically housed within the Map Library usuallycan be accessed and individual sheets retrieved from immediately. Map sets housed at the Oak Street Library Facility will need to berequested through the online catalog for delivery to and in-library use at the Map Library.Retrieval from Oak Street may take up to two business days.